Stuttgart Classica USA

  • Intake
  • Complete EFI ITB Kit with Emerald ECU

Complete EFI ITB Kit with Emerald ECU

from $10,495.00
IMG_3058.jpg
IMG_3060.jpg
96257f83-f071-45a2-b2b1-e9a503bd1084.jpeg
IMG_1582.jpeg
dc8d52b1cf56ccdfbe9e01e78b89cdfd0bdea4cc.jpeg
IMG_1583.jpeg
IMG_1585.jpeg

Complete EFI ITB Kit with Emerald ECU

from $10,495.00

AT Power ‘Shaftless’ Individual Throttle Body Kit with Emerald ECU

Our Throttle Bodies come fully assembled and ready to bolt directly to the cylinder heads, with the following parts included:

  • Aerospace grade billet aluminium “shaft-less” individual throttle bodies

  • Aluminium inlets/extensions are suitable for duck or whale tail models

  • Optional 3D Printed custom curved Inlets/Extension available to allow for bonnet clearance around the standard 964 electronic spoilers

  • Aluminium ram pipes

  • Throttle position sensor (TPS)

  • Billet aluminium fuel rails

  • Thermal insulation gaskets

  • Throttle linkage system which connects directly to the existing OEM cable pick-ups

  • 2 bolt 911 fitment is available with 32mm, 35mm, 36mm, 39mm, 40mm, 42mm and 43mm inlet port size

  • 3 bolt 964/993 fitment is available with 42mm, 43mm, 44mm and 46mm inlet port size

  • Throttle sizes are 42mm, 45mm and 48mm

We have also listed the supporting parts that create this full plug & play kit:

  • Fuelling system - includes fuel Injectors, fuel pressure regulator with gauge, fuel lines, fittings and hoses to interface with existing fuel system

  • Vacuum system - includes vacuum block, non-return valves and associated interfacing pipework for brake boost assistance

  • Engine oil breather system - Includes all filters and interfacing components required

  • Megaflow air filtration system - includes Megaflow air filters complete with brushed aluminium pre-drilled Filter back plates

  • Optional adapters for our carbon fibre GT3 Plenum Kit

  • Heater duct system

As for engine management, you can choose from the following:

  • No ECU or harness

  • Emerald3D K6 ECU full engine management system with base map package, supplied complete with ECU, electrical engine patch harnesses with all hardware components and software required for Porsche 911 - (1978-1989).

  • Emerald3D K6 ECU full engine management system with base map package, supplied complete with ECU, full electrical engine harnesses with all hardware components including Trigger Wheel & Fan Pulley assembly, including sensor mounting bracket, Distributor blanking plug and software required for Porsche 911-SC - 3.0L - (1978-1983).

  • Emerald3D K6 ECU full engine management system with base map package, supplied complete with ECU, electrical engine patch harnesses with all hardware components and software required for Porsche 911 - (964/993).

Due to the removal of existing OEM parts and the introduction of light weight billet aluminium parts, we have found a reduction in weight of 10.5 kilos.

PLEASE NOTE - as with all after-market engine management systems, base maps are offered “as-is” and dyno tuning is highly recommended to avoid causing damage to your engine.

Free shipping on all items within North America!

Application:
ECU:
Quantity:
Add To Cart

AT Power ‘Shaftless’ Individual Throttle Body Kit with Emerald ECU

Our Throttle Bodies come fully assembled and ready to bolt directly to the cylinder heads, with the following parts included:

  • Aerospace grade billet aluminium “shaft-less” individual throttle bodies

  • Aluminium inlets/extensions are suitable for duck or whale tail models

  • Optional 3D Printed custom curved Inlets/Extension available to allow for bonnet clearance around the standard 964 electronic spoilers

  • Aluminium ram pipes

  • Throttle position sensor (TPS)

  • Billet aluminium fuel rails

  • Thermal insulation gaskets

  • Throttle linkage system which connects directly to the existing OEM cable pick-ups

  • 2 bolt 911 fitment is available with 32mm, 35mm, 36mm, 39mm, 40mm, 42mm and 43mm inlet port size

  • 3 bolt 964/993 fitment is available with 42mm, 43mm, 44mm and 46mm inlet port size

  • Throttle sizes are 42mm, 45mm and 48mm

We have also listed the supporting parts that create this full plug & play kit:

  • Fuelling system - includes fuel Injectors, fuel pressure regulator with gauge, fuel lines, fittings and hoses to interface with existing fuel system

  • Vacuum system - includes vacuum block, non-return valves and associated interfacing pipework for brake boost assistance

  • Engine oil breather system - Includes all filters and interfacing components required

  • Megaflow air filtration system - includes Megaflow air filters complete with brushed aluminium pre-drilled Filter back plates

  • Optional adapters for our carbon fibre GT3 Plenum Kit

  • Heater duct system

As for engine management, you can choose from the following:

  • No ECU or harness

  • Emerald3D K6 ECU full engine management system with base map package, supplied complete with ECU, electrical engine patch harnesses with all hardware components and software required for Porsche 911 - (1978-1989).

  • Emerald3D K6 ECU full engine management system with base map package, supplied complete with ECU, full electrical engine harnesses with all hardware components including Trigger Wheel & Fan Pulley assembly, including sensor mounting bracket, Distributor blanking plug and software required for Porsche 911-SC - 3.0L - (1978-1983).

  • Emerald3D K6 ECU full engine management system with base map package, supplied complete with ECU, electrical engine patch harnesses with all hardware components and software required for Porsche 911 - (964/993).

Due to the removal of existing OEM parts and the introduction of light weight billet aluminium parts, we have found a reduction in weight of 10.5 kilos.

PLEASE NOTE - as with all after-market engine management systems, base maps are offered “as-is” and dyno tuning is highly recommended to avoid causing damage to your engine.

Free shipping on all items within North America!

Complete EFI ITB Kit with Motec ECU dc8d52b1cf56ccdfbe9e01e78b89cdfd0bdea4cc.jpeg
Complete EFI ITB Kit with Motec ECU
from $16,995.00
Rubber Sleeve Kit for GT3 Plenums IMG_5671.jpg
Rubber Sleeve Kit for GT3 Plenums
from $149.00
GT3 Plenum And Filter IMG_5147.jpg
GT3 Plenum And Filter
from $3,495.00
AT Power Shaftless ITBs IMG_1582.jpeg
AT Power Shaftless ITBs
from $5,495.00
Complete EFI ITB Kit with Haltech ECU IMG_4976.jpg
Complete EFI ITB Kit with Haltech ECU
from $8,995.00